Search
Now showing items 11-20 of 64
Frequency response based system identification and controller tuning
(1997)
A detailed simulation based analysis of different frequency response and transfer function identification techniques are performed and critically studied. Standard closed loop and open loop recursive least squares system ...
Dynamic modeling and analysis of circumferential and spiral waves in piezoelectric cylinders
(2012)
Understanding the dynamic characteristics of ultrasonic guided wave in structures is important,
as it is one of the methods that are widely used in many different areas of industrial sectors and
inspections, such as ...
Treatment of synthetic Kraft evaporator condensate and thermomechanical pulp pressate using novel thermophilic and mesophilic bioreactors / by Meiru Zheng.
(2008)
A comparative study on the treatment of synthetic kraft evaporator condensate and thermomechanical pulp (TMP) pressate between thermophilic (55°C) and mesophilic (30°C) temperature was conducted using sequencing batch ...
Testing of nitride-semiconductor-based sensors for monitoring in control systems / by Hang Yu.
(2008)
"Sensors have become integrated into control system, for either mechanical, optical, chemical, or biological applications. The new materials for the sensor designing, diluted magnetic semiconductors (DMS), are attractive ...
Effects of sucrose and sorbitol on cement hydration applications to cement stabilization of metal waste
(2007)
Cement-based stabilization/solidification (S/S) is a widely used technique to treat industrial wastes containing toxic metal ions before land disposal. To prevent the fast setting of the treated waste during its transportation ...
Hydrodeoxygenation process for converting glycerol into bio-crude / by Matthew A. Tymchyshyn.
(2010)
"Bio-energy is a clean (containing negligible sulfur and being near-carbon neutral), renewable and abundant source of energy. Bio-energy can be a potential alternative to fossil fuels for the production of energy and ...
Evolving neural fuzzy classifier for machinery diagnostics / by Ofelia Antonia Jianu.
(2010)
"The classical techniques for fault diagnosis require periodic shut down of machines for manual inspection. Although these techniques can be used for fault diagnosis in simple machines, they can rarely be used effectively ...
Efficiency optimal control of interior permanent magnet synchronous motor / by Fasil Abera.
(2009)
There has been a growing concern over energy consumption since the past decade mainly because of the soaring cost of energy and tight environmental laws and regulations. In this thesis a model based efficiency optimization ...
Model reference adaptive control system using frequency domain performance specifications
(1999)
MRAS (Model Reference Adaptive System) to achieve frequency domain performance specifications
with different transfer function identification techniques are experimentally studied.
Standard open loop and closed loop ...
Thermophilic and mesophilic aerobic biological treatment of wastewater / by Shawn Langevin.
(2009)
"To achieve closed cycle operation and subsequent reuse of treated effluent, individual streams of pulp and paper mill effluents are being evaluated for their suitability fur in-mill treatment. This thesis includes two ...