Search
Now showing items 1-10 of 41
Treatment of synthetic Kraft evaporator condensate and thermomechanical pulp pressate using novel thermophilic and mesophilic bioreactors / by Meiru Zheng.
(2008)
A comparative study on the treatment of synthetic kraft evaporator condensate and thermomechanical pulp (TMP) pressate between thermophilic (55°C) and mesophilic (30°C) temperature was conducted using sequencing batch ...
Testing of nitride-semiconductor-based sensors for monitoring in control systems / by Hang Yu.
(2008)
"Sensors have become integrated into control system, for either mechanical, optical, chemical, or biological applications. The new materials for the sensor designing, diluted magnetic semiconductors (DMS), are attractive ...
Effects of sucrose and sorbitol on cement hydration applications to cement stabilization of metal waste
(2007)
Cement-based stabilization/solidification (S/S) is a widely used technique to treat industrial wastes containing toxic metal ions before land disposal. To prevent the fast setting of the treated waste during its transportation ...
Efficiency optimal control of interior permanent magnet synchronous motor / by Fasil Abera.
(2009)
There has been a growing concern over energy consumption since the past decade mainly because of the soaring cost of energy and tight environmental laws and regulations. In this thesis a model based efficiency optimization ...
Thermophilic and mesophilic aerobic biological treatment of wastewater / by Shawn Langevin.
(2009)
"To achieve closed cycle operation and subsequent reuse of treated effluent, individual streams of pulp and paper mill effluents are being evaluated for their suitability fur in-mill treatment. This thesis includes two ...
System identification and control of a flexible manipulator
(2000)
The Observabilty Range Space Extraction (ORSE) algorithm used to identify a an initially overparameterized discrete-time state-space model for a single-link flexible manipulator. A controller named PDPC is designed to ...
Optimal trajectory control of series resonant converter
(2001)
Resonant power converters have gained increased attention in industry due to various
advantages over conventional pulse width modulation (PWM) converters. Resonant
converters have improved transient response, reduced ...
Self-tuned neuro-fuzzy controller based induction motor drive / by Zhi Rui Huang.
(2007)
Among various ac motors, induction motor (IM) occupies almost 90% of the industrial drives due to its simple, robust construction and generally satisfactory efficiency as compared to dc motor. However, the control of IM ...
Modeling and control of a flexible-link manipulator
(2001)
The behaviour of a flexible-link robotic manipulator is studied using an experimental
apparatus. The system is modeled based on the physical laws governing system
dynamics. A non-linear rigid body model is developed which ...
Removal of pharmaceutically active compounds from water systems using freeze concentration / by Yuanyuan Shao.
(2007)
In the last few years, there has been a growing concern in the occurrence of pharmaceutically active compounds in the aquatic environment. Just in Europe, more than 3000 prescription and non-prescription drugs are used by ...