An ytterbium-doped fiber laser at 1.1 um
Abstract
A pulsed ytterbium-doped fiber laser is proposed and developed. A length of
samarium-doped fiber was inserted into the laser cavity to induce passive Q-switching.
The laser oscillated in the continuous wave, Q-switched mode-locked or Q-switched
regime depending on adjustment of the intracavity polarization controller and the pump
power. Q-switched pulses with a pulse energy of ~7.5 nJ and duration of ~70 ns were
obtained at a pump power of ~1500 mW, corresponding to a peak output power of ~106
mW at an average power of 2 mW. The low output power was attributed to the low
coupling efficiency of pump radiation into the cavity and the high cavity losses. All
results were obtained at room temperature.
Collections
Related items
Showing items related by title, author, creator and subject.
-
Tunable high-power fiber laser and its application to produce Brillouin fiber lasers
Valiunas, Jonas Kestutis (2012-11-10)A tunable continuous wave single-longitudinal-mode fiber laser is proposed and developed. A saturable absorber, as well as, an all-fiber Fabry-Perot filter was used in the laser cavity to reduce mode-hopping. The laser ... -
Fiber laser system for the detection of trace gas
Valiunas, Jonas Kestutis (2017)The research presented in this thesis is on the development of a trace gas detection system based on intracavity absorption spectroscopy (ICAS). The developed system was capable of detecting nitrous oxide (N2O) and acetylene ... -
Multiwavelength erbium-ytterbium co-doped fiber laser / by Mansour Dastmalchi.
Dastmalchi, Mansour (2007)A fiber ring laser, using erbium-ytterbium co-doped double clad fiber is proposed and demonstrated to produce a medium power multiwavelength fiber laser. The experimental results show that the ring resonator configuration ...