Show simple item record

dc.contributor.advisorLiao, Baoqiang
dc.contributor.advisorLeung, Kam Tin
dc.contributor.authorBogati, Ram Chandra
dc.date.accessioned2014-01-22T16:35:56Z
dc.date.available2014-01-22T16:35:56Z
dc.date.created2012-10
dc.date.issued2014-01-22
dc.identifier.urihttp://knowledgecommons.lakeheadu.ca/handle/2453/481
dc.description.abstractTreatment of surface water in the presence of natural organic matters (NOM) becomes a challenging issue to meet stringent rules of Safe Drinking Water Act (SDWA). Ultrafiltration (UF) membrane is emerging as an efficient technology for the purpose of potable water production. However, membrane fouling, ageing and chemical cleaning affect its performance and properties. The effects of ageing and chemical cleaning on performance and properties of the membrane were studied using UF membrane from full scale drinking water membrane filtration plant and simulated chemical cleaning sequences in laboratory. Organic and inorganic foulants, and membrane properties such as tensile strength, membrane morphology and surface functional groups were characterized using various analytical tools. The results from simulated chemical cleaning experiments were consistent with those from a full-scale plant, in terms of the effects of chemical cleaning on membrane properties. The results show that membrane ageing deteriorated the tensile strength and membrane integrity, and led to accumulation of foulants. Hypochlorite cleaning resulted in a decrease in membrane tensile strength, while citric acid cleaning had limited effect on membrane tensile strength. The decrease in membrane tensile strength correlated to a decrease in intensity of functional groups measured by FTIR. The results suggest that hypochlorite concentration and cleaning time should be minimized to reduce their impacts on membrane properties. Additionally, membrane cleaning strategies (cleaning agents’ concentration, cleaning time, pH, backwash frequency, and production time) currently used in Bare Point Water Treatment Plant were studied using a ZW-1000 pilot scale plant. The membrane performance in terms of permeability recovery was assessed using the recorded data; and organic and inorganic foulants were analyzed using Total Organic Carbon analyser (TOC) and Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP-AES). In sodium hypochlorite (NaClO) cleaning, lower concentrations combined with longer soak time achieved higher permeability recovery, with TOC results indicating that the major foulants responsible for permeability decrease were organic. Similarly, the results of citric acid cleaning suggest that lower pH was more effective in permeability recovery. Furthermore, the effect of production cycle or backwash frequency on the membrane performance was also studied to optimize water recovery; the results revealed that the membrane performances, fouling rate in terms of rate of change of TMP, recovery (%), and organic fouling depended on permeate cycle length or back wash frequency. This research concludes with the hypothesis that membrane fouling and ageing deteriorate membrane performance, whereas chemical cleaning agent (NaClO) enhances membrane performance and properties, respectively.en_US
dc.language.isoen_USen_US
dc.subjectDrinking water productionen_US
dc.subjectWater treatmenten_US
dc.subjectMembrane filtrationen_US
dc.subjectMembrane foulingen_US
dc.subjectUltrafiltration membranesen_US
dc.subjectPolyvinylidiene fluoride (PVDF)en_US
dc.titleMembrane fouling and its control in drinking water membrane filtration processen_US
dc.typeThesisen_US
etd.degree.nameM.Sc.en_US
etd.degree.levelMasteren_US
etd.degree.disciplineEngineering : Environmentalen_US
etd.degree.grantorLakehead Universityen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record