Search
Now showing items 1-10 of 13
Durability and mechanical properties of Portland cement concrete that utilizes crumb rubber as an alternative fine aggregat
(2018)
This research project investigated in an intensive experimental program the influence of using crumb rubber in the mechanical properties and durability of Portland cement concrete mixtures. Crumb rubber is produced from ...
Entropy-based reliability analysis and design in slope engineering
(2018)
Canada has a wide range of landslide types reflecting the diverse geomorphic
and geologic environments in the nation’s landscape. Many civil engineering
projects are located on or near sloping ground, and thus are ...
Building information modeling-enhanced visualization tool for structural health monitoring
(2018)
With growing number of modern complex infrastructure, robust and autonomous
condition assessment of large-scale structures under operational loads and extreme
climatic events has garnered significant attention. Data-driven ...
Non-destructive testing to monitor the strength increase of electrokinetically treated soil
(2018)
Electrokinetics in geotechnical engineering is used to increase the shear strength of soft soils and the load carrying capacity of piles embedded in these soils. This is achieved by decreasing the water content of the soil ...
Flexural bending behaviour of built-up glulam box-selection beams at ambient and elevated temperatures
(2018)
The recent increasing trend of sustainable construction and advancement in the manufacturing of engineered wood have made products such as glued-laminated timber (glulam) and cross-laminated timber (CLT) preferred building ...
An improved multi-variate empirical mode decomposition method towards system identification of structures
(2018)
Structural health monitoring (SHM) plays a key role towards condition assessment of
large-scale civil structures using modern sensing technology. Once the rich vibration
data is collected, important system information ...
Structural fire performance of bolted glulam beam-to-column concealed connections
(2018)
Recent increased interest in the application of engineered-wood products, such as glued-laminated (glulam) timber and cross-laminated timber (CLT), in the Canadian building construction market has prompted amendments to ...
Towards system identification using single channel measurement in wireless sensing network
(2018)
In the last few years, structural health monitoring has gained signifcant popularity to perform real-time condition assessment of civil structures. With the aid of
mobile sensing network, movable wireless sensors have ...
Examination of independent contributions of driver, crash, vehicle and geometric characteristics to driver fatalities
(2018)
In 2016, the National Highway Traffic Safety Administration (NHTSA) had recorded a total of 37,461 road-related mortalities within the United States alone. To alleviate the effects of road fatalities concerning economy and ...
Improved data compression techniques to analyze big data in structural health monitoring
(2018)
With growing number of complex and slender structures worldwide, long-term structural
health monitoring (SHM) has been intensively pursued to retrofit and control
these structures under extreme climatic events. Modern ...