Lakehead University Library Logo
    • Login
    View Item 
    •   Knowledge Commons Home
    • Electronic Theses and Dissertations
    • Electronic Theses and Dissertations from 2009
    • View Item
    •   Knowledge Commons Home
    • Electronic Theses and Dissertations
    • Electronic Theses and Dissertations from 2009
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.
    quick search

    Browse

    All of Knowledge CommonsCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsDisciplineAdvisorCommittee MemberThis CollectionBy Issue DateAuthorsTitlesSubjectsDisciplineAdvisorCommittee Member

    My Account

    Login

    Improving power of L1 data cache and register file utilizing critical path instructions

    Thumbnail
    View/Open
    ChenK2014m-1b.pdf (2.431Mb)
    Date
    2014
    Author
    Chen, Kuang-Lun
    Metadata
    Show full item record
    Abstract
    As transistor’s feature size shrinks, power becomes one of the limiting factors in design of modern processors. Cache and register file are the two power hungry components in processors, consuming more than one third of total processors’ power budget. In this thesis, we propose new architectures for cache and register file to reduce power consumption. In the new architectures, we have SRAM cells operating at two different voltage levels and we change the structure of the cells so that they dynamically switch between nominal and reduced supply voltage. Since power is proportional to voltage squared, an effective method to reduce power is lowering supply voltage. However, one of the side effects of using SRAM cells with reduced voltage is performance penalty. As supply voltage reduces, it takes longer to read/write from/to an SRAM cell. In this thesis, we exploit critical path instructions to overcome the performance impact of voltage scaling. Critical path instructions are chain of dependent instructions that constrain speed of processors. Those cells that are accessed frequently by critical instructions are assigned to use nominal supply voltage to preserve performance. On the other side, the cells that are seldom accessed by critical instructions are assigned to low supply voltage to reduce power consumption. To reduce overhead of voltage switching, we monitor critical instructions within long intervals and adjust the voltage of cells only when the intervals are elapsed. We have evaluated our optimization techniques using a combination of circuit and architectural simulators. First, we used HSPICE to measure both dynamic and static power and also latency of SRAM cells for nominal and reduced supply voltages. Then, the results from HSPICE were fed into Simplescalar for architectural evaluations. Our simulation results reveal that the low power cache and register file reduce power consumption significantly with negligible impact on performance.
    URI
    http://knowledgecommons.lakeheadu.ca/handle/2453/651
    Collections
    • Electronic Theses and Dissertations from 2009 [1638]

    Lakehead University Library
    Contact Us | Send Feedback

     

     


    Lakehead University Library
    Contact Us | Send Feedback